The CR-240-SA stent crimper has a 240 mm long servo controlled stent crimping head and is developed for nitinol stents. The machine has a double microscope camera system attached that displays on the large 15.5″ touch panel user interface.

The machine has two-hand control allowing for easy access to the crimping head while still being safe to operate.

The quick exchange delivery system holders can be exchanged fast and accurate. A small laser sensor detects the presence of the delivery system in the holder.

The pusher system also allows for fast and easy changing of pusher mandrels and can deliver a maximum of 200N pushing force.

During the process all data are stored and the pushing and radial forces are shown on screen if selected.

Technical Specification Stent Crimping CR-240-SA


Stent crimping length240 mm
Stent typeSelf expandable stents (non-DES)
Maximum crimper diameter35 mm
Minimum crimper diameter0 mm
Maximum crimping force1000N radial
Diameter accuracy +/- 0.02 mm @ 100N
Crimp speed0.1 – 10 mm /s
Maximum pushing force200 N
Stent loadingManual
GUI15.5” color touch panel
Control software

Recipe based

Password levels (operator, engineer, calibrator)

Remote support option

Two integrated microscope camera’s

Required airpressure7 bar minimum
Power supply110-240VAC / 0.8kW

Contact us now for any enquiries