CR-220-CP STENT CRIMPER
The CR-220-CP stent crimper is developed for crimping Nininol stents with a maximum length of 200 mm.
The crimper is pneumatically activated. A stroke limiter determines the closing diameter.
The crimper can be cooled to -15C. A protective gas environment prevents the system to freeze and the crimped products remain perfectly dry and without any ice.
The system uses the MPT Europe BV developed zero gap stent crimping technology with stainless toolsteel blades. The special coating used on these blades ensures an exceptional low friction and high-wear resistance.
|Technical Specification Stent Crimping CR-220-CP|
|Stent crimping length||220 mm|
|Stent type||Self expandable stents (non-DES)|
|Maximum crimper diameter||30 mm|
|Minimum crimper diameter||0 mm|
|Maximum crimping force||500N radial pneumatic controlled|
|Temperature||-15C – 20C|
|Diameter accuracy||end stroke limiter|
|Crimp speed||pneumatic controlled|
|Maximum pushing force||200 N|
|Required airpressure||7 bar minimum|
|Required N2||1 bar minimum|
|Power supply||110-240VAC / 0.8kW|