PSM-400-SD Parison Stretching Machine
Parison stretching is an integral part of balloon blowing. So MPT Europe BV has put its innovative design efforts to built and design the perfect perison stretching machine.
The PSM-400-SD is the result of this design effort and provides a parison die stretching machine that gives optimal stretching results without some of the drawbacks of the current available machines.
The machine is fully servo controlled and can strech parisons with forces upto 500N. An accurate and easy to control sensor system allows for a well defined secondary stretch and thus repeatable parisons. All parameters are recipe controlled.
An innovative preheating system ensures the stretching dies do not damage the parison material prior or during the stretching in any way. This aswell prevents polution of the streching dies preventing down-time on the production lines. The stretching dies themselves can easily be removed and replaced for different dimension dies. The highly polished dies can be quickly made at your specific dimensional requests.
To round it all off the machine is of very high built quality and combined with the MPT Europe BV well thought trough general design it is the perfect solution for your parison forming demands.
The machine can also be delivered as a PSM-500-SD (additional 100 mm stroke)
|Technical Specification PSM-400-SD & PSM-500-SD|
|Stretch technology||Heated split-die drawing principle|
|Split-die material||Stainless toolsteel / high polished die cavity|
|Maximum tube diameter||6.5 mm (optional largers parisons are possible)|
|Minimum parison formed length||7 mm (when using the transition detection sensor)|
|Maximum parison formed length||80 mm (when using the transition detection sensor)|
|Stetch force||500N max|
|Stretch speed||25 mm/s max (servo controlled)|
|Stretch acceleration||2000 mm/s2|
|Stretch length||400 mm max (=500 mm on PSM-500-SD)|
|Clamping||Self aligning clamp|
|Stretch Temperature||20-220C +/- 0.5C|
|Preheat system||20-220C +/- 0.5C with adjustable time and strokes|
|GUI||10” color touch panel|
|Control software||Recipe based|
Password levels (operator, engineer, calibrator)
Remote support option
|Required air pressure||7 bar minimum|
|Power supply||110-240VAC / 0.8kW|