The CR-60-HC crimper is a crimper developed for crimping biopolymer stents on balloon catheters.

The system can both heat and cool the stents and has an internal inflation / deflatiom system for optimum stent embedding. This results in high retension forces.

The system is diameter controlled and the products are loaded into the system using a unique product alignment system that allows alignment with the final catheter product outside the crimper head.

The blades are 60 mm long and the maximum opening of the system is 20 mm. It can fully close. Using the unique MPT Europe BV stent crimping technology a big advantage to processing biopolymer stents is the minium relative motion the system has. This puts minimal stresses on the product during the crimping actions.

CR-60-HC stent crimper for biodegradable stents

CR-60-HC stent crimper for biodegradable stents

Technical Specification Stent Crimping CR-60-HC for Biopolymer Stents
Stent crimping length 60 mm
Stent type Biopolymer stents
Maximum crimper diameter 20 mm
Cooling & Heating 8C – 80C process programmable
Maximum crimping force 300N radial
Diameter accuracy +/- 0.02 mm @ 100N
Crimp speed 0.1 – 10 mm /s
Catheter inflation/deflation Integrated 6 bar / -0.8 bar
Stent loading With external product alignment and manual transfer
GUI 4.5” color touch panel
Control software Recipe based

Password levels (operator, engineer, calibrator)

Remote support option

Ethernet 1x
Required airpressure 7 bar minium
Power supply 115 or 240VAC / 0.8kW

Call Us Now For Any Enquiries

+31 (0) 594 51 91 51

Email Us